HandPiece High Speed Maxso M200E

Single Spray

A precise spray ensures the best cooling effect at the treatment site.

Push Button

The simple operation of the push-button chucking system allows quick bur change.

Stainless Steel

Advanced technologies and materials result in long-lasting life.

Noise Level

Effective frequency optimization ensures a pleasant and low turbine noise.

Operating Precautions
• Always use a handpiece holder when washing the handpiece, making sure to rinse the
inside of the handpiece thoroughly.
• If any medical agent remains inside the handpiece, it may corrode or clog the air or
water pipe, resulting in a malfunction of the handpiece.
• For details on handling medical agents or adjusting their concentration, refer to the user
manual for the washing device.
• After washing is complete, check to see if the handpiece, including its inside, is
completely dry. If any water remains inside the handpiece, expel it with an air gun or
another such tool. Failure to do so could result in the remaining water coming out during
use and cause poor lubrication or sterilization.
• Always lubricate the handpiece after washing.
 Inappropriate cleaning methods and solutions will damage the handpiece
 Do not clean the handpiece using strong acidic or alkaline solutions that could
 cause the metal to corrode.
 Do not leave a handpiece inside the high-temperature washer-disinfector.

Lubrication
Chuck System Lubrication 
1. Fit the spray nozzle onto the spray can
2. Grip the handpiece firmly
3. Press the tip of the spray nozzle firmly into the chuck system
4. Spray about 1 second
5. Push the button three times

Handpiece Lubrication (Turbine)
• After internal cleaning
• Prior Sterilization
• The Handpiece must be cleaned and sterilized between patient uses